目次

# 数の書式コード

Number format codes can consist of up to four sections separated by a semicolon (;).

1. In a number format code with two sections, the first section applies to positive values and zero, and the second section applies to negative values.

2. In a number format code with three sections, the first section applies to positive values, the second section to negative values, and the third section to the value zero.

3. You can also assign conditions to the three sections, so that the format is only applied if a condition is met.

4. Fourth section applies if the content is not a value, but some text. Content is represented by an at sign (@).

## Decimal Places and Significant Digits

Use zero (0), the number sign (#) or the question mark (?) as placeholders in your number format code to represent numbers. The # only displays significant digits, while the 0 displays zeroes if there are fewer digits in the number than in the number format. The ? works as the # but adds a space character to keep decimal alignment if there is a hidden non-significant zero.

Use question marks (?), zeroes (0) or number signs (#) to represent the number of digits to include in the numerator and the denominator of a fraction. Fractions that do not fit the pattern that you define are displayed as floating point numbers.

If a number contains more digits to the right of the decimal delimiter than there are placeholders in the format, the number is rounded accordingly. If a number contains more digits to the left of the decimal delimiter than there are placeholders in the format, the entire number is displayed. Use the following list as a guide for using placeholders when you create a number format code:

プレースホルダー | 説明
--- | ---
# | Does not display extra zeros.
? | Displays space characters instead of extra zeros.
0 (Zero) | Displays extra zeros if the number has less places than zeros in the format.

### 例

Number Format | 書式コード
--- | ---
3456.78 as 3456.8 | ####.#
9.9 as 9.900 | #.000
13 as 13.0 and 1234.567 as 1234.57 | #.0#
5.75 as 5 3/4 and 6.3 as 6 3/10 | # ???/???
.5 as 0.5 | 0.##
.5 as 0.5 (with two extra spaces at the end) | 0.???

### Thousands Separator

Depending on your language setting, you can use a comma, a period or a blank as a thousands separator. You can also use the separator to reduce the size of the number that is displayed by a multiple of 1000 for each separator. The examples below use comma as thousands separator:

Number Format | 書式コード
--- | ---
15000 as 15,000 | #,###
16000 as 16 | #,

## Including Text in Number Format Codes

### Text and Numbers

To include text in a number format that is applied to a cell containing numbers, place a double quotation mark (") in front of and behind the text, or a backslash (\) before a single character. For example, enter #.# "meters" to display "3.5 meters" or #.# \m to display "3.5 m". If you use space as thousands separator, you need to insert spaces between quotes in the previous examples: #.#" meters" or #.#\ \m to get the correct result.

### Text and Text

To include text in a number format that is applied to a cell that might contain text, enclose the text by double quotation marks (" "), and then add an at sign (@). For example, enter "Total for "@ to display "Total for December".

### Spaces

To use a character to define the width of a space in a number format, type an underscore (_) followed by the character. The width of the space varies according to the width of the character that you choose. For example, _M creates a wider space than _i.

To fill free space with a given character, use an asterisk (*) followed by this character. For instance:

*\0

will display integer value (0) preceded by as many as needed backslash characters (\) to fill column width. For accounting representation, you may left align currency symbol with a format similar to:

$_-* 0.--;$-* 0.--;$_-* -

## Color

To set the color of a section of a number format code, insert one of the following color names in square brackets [ ]:

CYAN | GREEN
BLACK | BLUE
MAGENTA | RED
WHITE | YELLOW

## Conditions

### Conditional Brackets

You can define a number format so that it only applies when the condition that you specify is met. Conditions are enclosed by square brackets [ ].

You can use any combination of numbers and the <, <=, >, >=, = and <> operators.

For example, if you want to apply different colors to different temperature data, enter:

[BLUE][<0]#.0 "°C";[RED][>30]#.0 "°C";[BLACK]#.0 "°C"

All temperatures below zero are blue, temperatures between 0 and 30 °C are black, and temperatures higher than 30 °C are red.

### Positive and Negative Numbers

To define a number format that adds a different text to a number depending on if the number is positive, negative, or equal to zero, use the following format:

"plus" 0;"minus" 0;"null" 0

## Percentages, Scientific Notation and Fraction Representation

### Percentages

To display numbers as percentages, add the percent sign (%) to the number format.

### Scientific Notation

Scientific notation lets you write very large numbers or very small fractions in a compact form. For example, in scientific notation, 650000 is written as 6.5 x 105, and 0.000065 as 6.5 x 10-5. In LibreOffice, these numbers are written as 6.5E+5 and 6.5E-5, respectively. To create a number format that displays numbers using scientific notation, enter a # or 0, and then one of the following codes E-, E+, e- or e+. If sign is omitted after E or e, it won't appear for positive value of exponent. To get engineering notation, enter 3 digits (0 or #) in the integer part: ###.##E+00 for instance.

### Fraction Representation

To represent a value as a fraction, format consists of two or three parts: integer optional part, numerator and denominator. Integer and numerator are separated by a blank or any quoted text. Numerator and denominator are separated by a slash character. Each part can consist of a combination of #, ? and 0 as placeholders.

Denominator is calculated to get the nearest value of the fraction with respect to the number of placeholders. For example, PI value is represented as 3 16/113 with format:

# ?/???

Denominator value can also be forced to the value replacing placeholders. For example, to get PI value as a multiple of 1/16th (i.e. 50/16), use format:

?/16

## Number Format Codes of Currency Formats

The default currency format for the cells in your spreadsheet is determined by the regional setting of your operating system. If you want, you can apply a custom currency symbol to a cell. For example, enter #,##0.00 € to display 4.50 € (Euros).

You can also specify the locale setting for the currency by entering the locale code for the country after the symbol. For example, [$€-407] represents Euros in Germany. To view the locale code for a country, select the country in the Language list on the Numbers tab of the Format Cells dialog.

通貨の書式コードの形式は、[$xxx-nnn] です。ただし、xxx は通貨記号、nnn は国コードです。EUR (ユーロ) などの特殊な銀行業務用記号では、国コードを必要としません。通貨の書式は、言語 ボックスで選択した言語とは無関係に設定できます。

## Date and Time Formats

Microsoft Excel wrongly assumes year 1900 to be a leap year and considers the inexistent day of 1900-02-29 as valid in date calculations. Dates prior to 1900-03-01 are therefore different in Excel and Calc.

### Date Formats

To display days, months and years, use the following number format codes.

すべての言語に対して、すべての書式コードが意味のある結果をもたらすわけではありません。

書式 | 書式コード
--- | ---
Month as 3. | M
Month as 03. | MM
Month as Jan-Dec | MMM
Month as January-December | MMMM
First letter of Name of Month | MMMMM
Day as 2 | D
Day as 02 | DD
Day as Sun-Sat | NN or DDD or AAA
Day as Sunday to Saturday | NNN or DDDD or AAAA
Day followed by comma, as in "Sunday," | NNNN
Year as 00-99 | YY
Year as 1900-2078 | YYYY
Calendar week | WW
Quarterly as Q1 to Q4 | Q
Quarterly as 1st quarter to 4th quarter | QQ
Era, abbreviation. On the Japanese Gengou calendar, single character (possible values are: M, T, S, H) | G
Era, abbreviation | GG
Era, full name | GGG
Number of the year within an era, short format | E
Number of the year within an era, long format | EE or R
Era, full name and year | RR or GGGEE

The above listed formatting codes work with your language version of LibreOffice. However, when you need to switch the locale of LibreOffice to another locale, you need to know the formatting codes used in that other locale.

例えば、ソフトウェアのロケールを英語に設定していて、 年を4桁の形式にしたいときは書式形式を YYYY で設定します。ロケールをドイツ語に変えたときは、年の書式を JJJJ に変えます。次の表はローカライズ時の違いだけを一覧にしてあります。

ロケール | 年 | 月 | 日 | 時 | 曜日 | 年代
--- | --- | --- | --- | --- | --- | ---
English - en 一覧にないロケール | Y | M | D | H | A | G
ドイツ語 - de | J |  | T |  |  |
オランダ - nl | J |  |  | U |  |
フランス語 - fr | A |  | J |  | O |
イタリア語 - it | A |  | G |  | O | X
ポルトガル語 - pt | A |  |  |  | O |
スペイン語 - es | A |  |  |  | O |
デンマーク語 - da |  |  |  | T |  |
ノルウェー語 - no, nb, nn |  |  |  | T |  |
スウェーデン語 - sv |  |  |  | T |  |
フィンランド語 - fi | V | K | P | T |  |

### Entering Dates

To enter a date in a cell, use the Gregorian calendar format. For example, in an English locale, enter 1/2/2002 for Jan 2, 2002.

All date formats are dependent on the locale that is set in LibreOffice - Preferences Tools - Options - Languages and Locales - General. For example, if your locale is set to 'Japanese', then the Gengou calendar is used. The default date format in LibreOffice uses the Gregorian Calendar.

To specify a calendar format that is independent of the locale, add a modifier in front of the date format. For example, to display a date using the Jewish calendar format in a non-Hebrew locale, enter: [~jewish]DD/MM/YYYY.

The specified calendar is exported to Microsoft Excel using extended LCID. Extended LCID can also be used in the format string. It will be converted to a calendar modifier if it is supported. See Extended LCID section below.

Modifier | カレンダー
--- | ---
[~buddhist] | Thai Buddhist Calendar
[~gengou] | Japanese Gengou Calendar
[~gregorian] | Gregorian Calendar
[~hanja] or [~hanja_yoil] | Korean Calendar
[~hijri] | Arabic Islamic Calendar
[~jewish] | Jewish Calendar
[~ROC] | Republic Of China Calendar

If you perform a calculation that involves one or more cells using a date format, the result is formatted according to the following mappings:

Initial Format | Result Format
--- | ---
Date + Date | Number (Days)
Date + Number | 日付
Date + Time | Date&Time
Date + Date&Time | Number
Time + Time | 時刻
Time + Number | Time
Time + Date&Time | Date&Time
Date&Time + Date&Time | Time
Date&Time + Number | Date&Time
Number + Number | Number

The Date & Time format displays the date and time that an entry was made to a cell with this format.

LibreOffice では、年数が 4 桁で示されます。したがって、99/1/1 と 01/1/1 では、その差は 2 年になります。年 (2 桁) では、2 桁の年数に 2000 を加算する年を指定できます。例えば、この設定で「30/1/1」以降の日付を指定した場合、「20/1/1」は「1920/1/1」ではなく「2020/1/1」と認識されます。

By default in LibreOffice, a date with the value "0" corresponds to Dec 30, 1899.

### Time Formats

To display hours, minutes and seconds use the following number format codes:

書式 | 書式コード
--- | ---
Hours as 0-23 | H
Hours as 00-23 | HH
Hours as 00 up to more than 23 | [HH]
Minutes as 0-59 | M
Minutes as 00-59 | MM
Minutes as 00 up to more than 59 | [MM]
Seconds as 0-59 | S
Seconds as 00-59 | SS
Seconds as 00 up to more than 59 | [SS]

To display seconds as fractions, add the decimal delimiter to your number format code. For example, enter HH:MM:SS.00 to display the time as "01:02:03.45".

Minute time formats M and MM must be used in combination with hour or second time formats to avoid confusion with month date format.

If a time is entered in the form 02:03.45 or 01:02:03.45 or 25:01:02, the following formats are assigned if no other time format has been specified: MM:SS.00 or [HH]:MM:SS.00 or [HH]:MM:SS

The time can be suffixed with AM/PM to have hours in 0-12 AM/PM format.

## Displaying Numbers Using Native Characters

## NatNum modifiers

To display numbers using native number characters, use a [NatNum1], [NatNum2], ..., [NatNum11] modifier at the beginning of a number format codes.

To spell out numbers in various number, currency and date formats, use a [NatNum12] modifier with the chosen arguments at the beginning of a number format code. See NatNum12 section below.

The [NatNum1] modifier always uses a one to one character mapping to convert numbers to a string that matches the native number format code of the corresponding locale. The other modifiers produce different results if they are used with different locales. A locale can be the language and the territory for which the format code is defined, or a modifier such as [$-yyy] that follows the native number modifier. In this case, yyy is the hexadecimal MS-LCID that is also used in currency format codes. For example, to display a number using Japanese short Kanji characters in an English US locale, use the following number format code:

[NatNum1][$-411]0

In the following list, the Microsoft Excel [DBNumX] modifier that corresponds to LibreOffice [NatNum] modifier is shown. If you want, you can use a [DBNumX] modifier instead of [NatNum] modifier for your locale. Whenever possible, LibreOffice internally maps [DBNumX] modifiers to [NatNumN] modifiers.

[NatNum] 修飾キーを使用して日付を表示させると、ほかの種類の数値とは別の効果を加えることができます。そのような効果は、「CAL: 」で示されます。たとえば、「CAL: 1/4/4」は、年を、[NatNum1] 修飾キーで表示し、日と月を [NatNum4] 修飾キーで表示することを示します。「CAL」を指定しないと、特定の修飾キーに対する日付書式はサポートされません。

[NatNum0]

Try to convert any native number string to ASCII Arabic digits. If already ASCII, it remains ASCII.

[NatNum1]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | Chinese lower case characters |  | CAL: 1/7/7 [DBNum1]
日本語 | short Kanji characters | [DBNum1] | CAL: 1/4/4 [DBNum1]
Korean | Korean lower case characters | [DBNum1] | CAL: 1/7/7 [DBNum1]
Hebrew | Hebrew characters |  |
Arabic | Arabic-Indic characters |  |
タイ語 | タイ文字 |  |
ヒンディー語 | Indic-Devanagari characters |  |
オディア語 | オディア（オリヤー）文字 |  |
Marathi | Indic-Devanagari characters |  |
Bengali | Bengali characters |  |
Punjabi | Punjabi (Gurmukhi) characters |  |
グジャラート語 | Gujarati characters |  |
Tamil | Tamil characters |  |
テルグ語 | テルグ文字 |  |
カンナダ語 | カンナダ文字 |  |
マラヤーラム語 | マラヤーラム文字 |  |
ラオ語 | Lao characters |  |
Tibetan | Tibetan characters |  |
Burmese | Burmese (Myanmar) characters |  |
Khmer | Khmer (Cambodian) characters |  |
モンゴル語 | Mongolian characters |  |
ネパール語 | Indic-Devanagari characters |  |
Dzongkha | Tibetan characters |  |
Farsi | East Arabic-Indic characters |  |
Church Slavic | Cyrillic characters |  |

[NatNum2]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | Chinese upper case characters |  | CAL 2/8/8 [DBNum2]
日本語 | traditional Kanji characters |  | CAL 2/5/5 [DBNum2]
Korean | Korean upper case characters | [DBNum2] | CAL 2/8/8 [DBNum2]
Hebrew | Hebrew numbering |  |

[NatNum3]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | fullwidth Arabic digits |  | CAL: 3/3/3 [DBNum3]
日本語 | fullwidth Arabic digits |  | CAL: 3/3/3 [DBNum3]
Korean | fullwidth Arabic digits | [DBNum3] | CAL: 3/3/3 [DBNum3]

[NatNum4]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | lower case text | [DBNum1] |
日本語 | modern long Kanji text | [DBNum2] |
Korean | formal lower case text |  |

[NatNum5]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | Chinese upper case text | [DBNum2] |
日本語 | traditional long Kanji text | [DBNum3] |
Korean | formal upper case text |  |

[NatNum6]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | fullwidth text | [DBNum3] |
日本語 | fullwidth text |  |
Korean | fullwidth text |  |

[NatNum7]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | short lower case text |  |
日本語 | modern short Kanji text |  |
Korean | informal lower case text |  |

[NatNum8]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Chinese | short upper case text |  |
日本語 | traditional short Kanji text | [DBNum4] |
Korean | informal upper case text |  |

[NatNum9]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Korean | Hangul characters |  |

[NatNum10]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Korean | formal Hangul text | [DBNum4] | CAL 9/11/11 [DBNum4]

[NatNum11]

Transliterations | Native Number Characters | DBNumX | Date Format
--- | --- | --- | ---
Korean | informal Hangul text |  |

### Extended LCID

If compatible, native numbering and calendar are exported to Microsoft Excel using extended LCID. Extended LCID can also be used in string format instead of NatNum modifier.

Extended LCID consists of 8 hexadecimal digits: [$-NNCCLLLL], with 2 first digits NN for native numerals, CC for calendar and LLLL for LCID code. For instance, [$-0D0741E] will be converted to [NatNum1][$-41E][~buddhist]: Thai numerals (0D) with Buddhist calendar (07) in Thai locale (041E).

Native Numerals

Two first digits NN represents native numerals:

NN | Numeral | Representation | Compatible LCID
--- | --- | --- | ---
01 | Arabic | 1234567890 | all
02 | Eastern Arabic | ١٢٣٤٥٦٧٨٩٠ | 401 1401, 3c01, 0c01, 801, 2c01, 3401, 3001, 1001, 1801, 2001, 4001, 2801, 1c01, 3801, 2401
03 | Persian | ۱۲۳۴۵۶۷۸۹۰ | 429
04 | Devanagari | १२३४५६७८९० | 439 44E, 461, 861
05 | ベンガル語 | ১২৩৪৫৬৭৮৯০ | 445 845
06 | Punjabi | ੧੨੩੪੫੬੭੮੯੦ | 446
07 | グジャラート語 | ૧૨૩૪૫૬૭૮૯૦ | 447
08 | オリヤー語 | ୧୨୩୪୫୬୭୮୯୦ | 448
09 | Tamil | ௧௨௩௪௫௬௭௮௯0 | 449 849
0A | テルグ語 | ౧౨౩౪౫౬౭౮౯౦ | 44A
0B | Kannada | ೧೨೩೪೫೬೭೮೯೦ | 44B
0C | マラヤーラム語 | ൧൨൩൪൫൬൭൮൯൦ | 44C
0D | タイ語 | ๑๒๓๔๕๖๗๘๙๐ | 41E
0E | ラオ語 | ໑໒໓໔໕໖໗໘໙໐ | 454
0F | Tibetan | ༡༢༣༤༥༦༧༨༩༠ | 851
10 | Burmese | ၁၂၃၄၅၆၇၈၉၀ | 455
11 | Tigrina | ፩፪፫፬፭፮፯፰፱0 | 473 873
12 | Khmer | ១២៣៤៥៦៧៨៩០ | 453
13 | モンゴル語 | ᠑᠒᠓᠔᠕᠖᠗᠘᠙᠐ | C50 850
1B | 日本語 | 一二三四五六七八九〇 | 411
1C | (financial) | 壱弐参四伍六七八九〇 |
1D | (fullwidth Arabic) | １２３４５６７８９０ |
1E | 中国語（簡体字） | 一二三四五六七八九○ | 804 1004, 7804
1F | (financial) | 壹贰叁肆伍陆柒捌玖零 |
20 | (fullwidth Arabic) | １２３４５６７８９０ |
21 | 中国語（繁体字） | 一二三四五六七八九○ | C04 1404
22 | (financial) | 壹貳參肆伍陸柒捌玖零 |
23 | (fullwidth Arabic) | １２３４５６７８９０ |
24 | Korean | 一二三四五六七八九０ | 812
25 | (financial) | 壹貳參四伍六七八九零 |
26 | (fullwidth Arabic) | １２３４５６７８９０ |
27 | Korean - Hangul | 일이삼사오육칠팔구영 |

Calendar

Two next digits CC are for calendar code. Each calendar is only valid for some LCID.

CC | Calendar | Example (YYYY-MM-DD) | Supported LCID
--- | --- | --- | ---
00 | Gregorian | 2016-08-31 | All
03 | Gengou | 28-08-31 | 411 (Japanese)
05 | Unknown | 4349-08-31 | Unsupported
06 or 17 | Hijri | 1437-11-28 | 401 (Arabic - Saudi Arabia), 1401 (Arabic - Algeria), 3c01 (Arabic - Bahrain), 0c01 (Arabic - Egypt), 801 (Arabic - Iraq), 2c01 (Arabic - Jordan), 3401 (Arabic - Kuwait), 3001 (Arabic - Lebanon), 1001 (Arabic - Libya), 1801 (Arabic - Morocco), 2001 (Arabic - Oman), 4001 (Arabic - Qatar), 2801 (Arabic - Syria), 1c01 (Arabic - Tunisia), 3801 (Arabic - U.A.E.), 2401 (Arabic - Yemen) and 429 (Farsi)
07 | Buddhist | 2559-08-31 | 454 (Lao), 41E (Thai)
08 | Jewish | 5776-05-27 | 40D (Hebrew)
10 | Indian | 1938-06-09 | Unsupported
0E, 0F, 11, 12 or 13 | Unknown | 2016-07-29 | Unsupported
Unsupported | Hanja |  | 412 (Korean)
Unsupported | ROC | 0105-08-31 | 404 (Chinese - Taiwan)

## NatNum12 modifier

To spell out numbers in various number, currency and date formats, use a [NatNum12] modifier with the chosen arguments at the beginning of a number format code.

Common NatNum12 formatting examples

Formatting code | Explanation
--- | ---
[NatNum12] | Spell out as cardinal number: 1 → one
[NatNum12 ordinal] | Spell out as ordinal number: 1 → first
[NatNum12 ordinal-number] | Spell out as ordinal indicator: 1 → 1st
[NatNum12 capitalize] | Spell out with capitalization, as cardinal number: 1 → One
[NatNum12 upper ordinal] | Spell out in upper case, as ordinal number: 1 → FIRST
[NatNum12 title] | Spell out in title case, as cardinal number: 101 → Hundred One
[NatNum12 USD] | Spell out as a money amount of a given currency specified by 3-letter ISO code: 1 → one U.S. dollar
[NatNum12 D=ordinal-number]D" of "MMMM | Spell out as a date in format "1st of May"
[NatNum12 YYYY=title year,D=capitalize ordinal]D" of "MMMM, YYYY | Spell out as a date in format "First of May, Nineteen Ninety-nine"
[NatNum12 MMM=upper]MMM-DD | Display upper case abbreviated month name in format "JAN-01"
[NatNum12 MMMM=lower]MMMM | Display lower case month name in format "january"

Other possible arguments: "money" before 3-letter currency codes, for example [NatNum12 capitalize money USD]0.00 will format number "1.99" as "One and 99/100 U.S. Dollars".

## エラーコード

If the value is outside the limits for the selected format the following error code is shown:

#FMT